Siemens FIDAMAT 6, Руководство по эксплуатации, Страница: 178 / 202

Appendix
A.2 Return procedure
FIDAMAT 6
176
Operating Instructions, 01/2019, A5E00222135-04
A.2 Return procedure
The device has to be returned in its original packaging. If the original packaging is no longer
available, return the device in appropriate packaging.
Include the delivery note, the goods document with the returned goods process mark and
decontamination certificate in a firmly attached clear plastic pouch on the outside of the
packaging.
With this decontamination declaration you warrant that the device/replacement part has been
carefully cleaned and is free of residues. The device/replacement part does not pose a
hazard for humans and the environment. If the returned device/replacement part has come
into contact with poisonous, corrosive, flammable or water-polluting substances, you must
thoroughly clean the device/replacement part before returning it, in order to ensure that all
hollow areas are free of hazardous substances. Check the item after it has been cleaned.
Devices/replacement parts without decontamination certificate will be returned to you at your
expense.
The forms are available on the supplied CD.
For more detailed information, refer to Return procedure
( https://support.industry.siemens.com/cs/ww/en/sc/4529 )
A.3 ESD guidelines
Definition of ESD
All electronic modules are equipped with large-scale integrated ICs or components. Due to
their design, these electronic elements are highly sensitive to overvoltage, and thus to any
electrostatic discharge.
The electrostatic sensitive components/modules are commonly referred to as ESD devices.
This is also the international abbreviation for such devices.
ESD modules are identified by the following symbol: