Siemens ET6 BEA Series, Руководство пользователя

Страница: 6 / 12

en
Familiarising yourself with your appliance
6
4 Familiarising yourself with your appliance
The instruction manual is the same for various different
hobs. You can find the hob dimensions in the overview
of models.
→ Page 2
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
4.2 Indicators/symbols
The displays show selected values and functions.
Display Name
- Heat settings
/ Residual heat
4.3 Touch fields
Touch fields are touch-sensitive surfaces. To select a
function, touch the relevant field.
Touch
field Name
Main switch
Hotplate selection
Childproof lock
⁠ Adjustment fields
Notes
¡
Always keep the control panel dry. Moisture impairs
the function.
¡
Do not pull pans close to the displays and touch
fields. The electronics may overheat.
4.4 Residual heat indicator
The hob has a two-stage residual heat indicator for
each hotplate. Do not touch the hotplate while the re-
sidual heat indicator is lit up.
Display Meaning
The hotplate is so hot that you can
keep small dishes warm or melt cook-
ing chocolate.
The hotplate is hot.
5 Basic operation
5.1 Switching the hob on or off
The main switch is used to switch the hob on and off.
If you switch the appliance back on again within
4 seconds after switching off, the hob will start up with
the previously stored settings.
5.2 Switching on the hob
▶
Touch .
a
The indicator lamp above lights up.
a
The displays light up.
a The hob is ready for use.
5.3 Switching off the hob
The hob will switch off automatically when all hotplates
have been switched off for a while (10-60 seconds).
▶
Touch .
a The indicator lamp above goes out.
a
The displays go out.
a
All hotplates are switched off.