Siemens ET375MU11E, Инструкция по эксплуатации

Страница: 15 / 60

15
The control panel
Controls
When you touch a symbol, the respective function is activated.
Notes
■
The settings will remain unchanged if you touch several
symbols at once. This allows you to wipe up spills on the
control panel.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
Residual heat indicator
The grill has a two-stage residual heat indicator.
If an
•
appears in the display, the grill is still hot. As the grill
continues to cool down, the indicator switches to
œ
. The
indicator goes out when the grill has cooled down sufficiently.
Before using for the first time
In this section, you can find out what you must do before using
your grill to prepare food for the first time. Read the
Safety
information
section beforehand.
Cleaning
Clean the grill and accessories thoroughly before first use
using lukewarm soapy water.
Heating the grill
Heat the empty grill for a few minutes at the highest setting.
This will eliminate the new odour. A slight development of
smoke is normal when the grill is used for the first time.
Grilling with water and lava stones
Fill the grill container with water before each use. The amount
of water depends on whether or not you wish to use lava
stones. The lava stones store the heat of the grill element and
thus ensure intensive radiation of heat and even distribution of
heat.
Filling with water and lava stones
1. Remove the wire rack and fold up the grill element. Remove
the lava stone container from the appliance.
2. Fill water into the grill container.
Grilling with lava stones: 0.7 litres (bottom mark)
Grilling without lava stones: 2.5 litres (top mark)
Controls
#
Main switch
0...+ Settings range for grill setting and timer
0
Timer
Displays
‚
-
Š
Grill setting
•
/
œ
Residual heat
°C Preheating symbol
U
Timer symbol
‹‹
Cooking time