manualshive.com logo in svg

Siemens ET 200SP HA, Руководство по эксплуатации оборудования

Поделиться
Скачать
Siemens ET 200SP HA Скачать руководство пользователя страница 32

Description

The LK LED indicates the following status:

LED

Meaning

Remedy

LK1/LK2

Off

There is no Ethernet connection between the PROFINET IO inter‐
face of your PROFINET device and a communication partner (e.g. IO 
controller).

Check whether the bus cable to the 
switch/IO controller is interrupted.

On

There is an Ethernet connection between the PROFINET IO inter‐
face of your PROFINET device and a communication partner (e.g. IO 
controller).

---

Flashes

The "Node flash test" is run (the RN/ER/MTLEDs also flash).

---

7.3

Useful information on error indicators

The LED error display provides information on the cause of the error.

The LED error display

• takes precedence over all other states that are displayed by the ERROR and MAINT LEDs.

• remains switched on until the cause of the error is eliminated

Error type and error location display (Page 32)

Example for error display (Page 33)

Displaying unsupported bus adapters

The LEDs RN (flashing), ER (flashing) and MAINT (off) on the interface module indicate that an 
unsupported bus adapter is connected.

7.4

Error display

7.4.1

Error type and error location display

Definition

After notification by the flash signal, the error type is displayed followed by the error location/
error code.

Displays and interrupts
7.4 Error display

IM 155-6 PN HA

32

Equipment Manual, 09/2021, A5E39262148-AE

Содержание ET 200SP HA

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды