Siemens EH....FE.., Инструкция по эксплуатации

Страница: 12 / 20

12
Time programming function
This function may be used in two different ways:
■
to automatically switch off a hotplate.
■
as a timer.
Turning off a hotplate automatically
The hotplate turns off automatically once the selected time has
elapsed.
Program the cooking time.
The hob must be switched on:
1.
Select the desired hotplate and power level.
2.
Press the 0 symbol. The x indicator on the hotplate lights
up. ‹‹ lights up in the time program function display.
3.
Within the next 10 seconds, select the desired cooking time
in the programming zone. The possible default setting is,
from left to right: 1, 2, 3, etc., up to 10 minutes.
After a few seconds, the cooking time begins to elapse.
Note:
The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The
Basic settings chapter provides information on
automatically programming the cooking time.
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming zone, the cooking time is reduced by one minute.
If the previous setting from 6 to 10 is pressed in the
programming zone, the cooking time is increased by one
minute.
Changing or cancelling the time
Select the hotplate and then press the 0 symbol.
Change the cooking time using the programming zone or set
to ‹‹ in order to cancel the time.
Automatically switch off a hotplate with the deep-frying
function
When cooking using the deep-frying function, the programmed
cooking time begins to count down once the selected zone
reaches the desired temperature.
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The time
program function lights up ‹‹ for 10 seconds in the display.
When the 0 symbol is pressed, the indications turn off and the
beeping stops.
Notes
■
If cooking times have been programmed for various
hotplates, the time programming function always displays the
time for the selected hotplate.
■
Any cooking time can be programmed for up to 99 minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
This functions independently from the hotplates and from other
settings. This function does not automatically switch off a
hotplate.
Programming
1.
Press the
0
symbol several times until the
W
indicator lights
up.
‹‹
lights up in the time program function display.
2.
Select the desired time in the programming panel.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the 0 symbol several times until the W indicator lights
up. Change the time with the programming zone, or set to ‹‹ .
Once the time has elapsed
A warning signal sounds. In the time program function
display
‹‹
is shown, and the
W
indicator lights up. After
10 seconds the indicators turn off.
When the
0
symbol is pressed, the indicators turn off and the
beeping stops.
Cleaning lock function
Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
‚
/
$
symbol. A signal sounds. The control panel is
locked for 35 seconds. The control panel surface can now be
cleaned without the risk of changing the settings.
Note.
The lock does not affect the main switch. The hob may
be turned off when desired.