Siemens EcoView Скачать руководство пользователя страница 55

Страница: 55 / 62

EcoView Web

Graphs

55 | 62

Siemens Industry, Inc.

EcoView Energy Management System

125-3586

Building Technologies

2017-09-11

Enabled. If a rule is Permanently Disabled, it cannot be re-enabled. A new rule

must be created if you want to be alerted about this condition in the future.

6. Click on the Save Changes button.

The rule is now disabled.

Graphs

The following graphs are available in EcoView Web.

Energy Consumption

The Energy Consumption graph summarizes the energy consumed (in kWh) at one or

more sites over a period of time (hourly, daily, weekly, or monthly).

NOTE: This graph requires that the EcoView Multi-phase Meter be installed at the site.

HVAC Performance

The HVAC Performance graph summarizes the performance of one HVAC unit at one

site. You can see if the HVAC unit is reaching its setpoint and how much time it is in

the cooling, idle, or heating state. The background colors on the graph indicate which

stage of heating or cooling is operating.
You may also display one or more auxiliary temperature sensors on the HVAC

Performance graph. If the auxiliary temperature sensor is measuring the supply air for

an air handling unit, then the supply temperature, space temperature, comfort

parameters, and mode of the air handling unit are displayed in one graph.

Содержание EcoView































































Результаты поиска

Содержание EcoView

Отзывы:

Похожие инструкции для EcoView

Бренды по названию

Популярные бренды

Siemens EcoView, Руководство пользователя

Результаты поиска

Содержание EcoView

Отзывы:

Похожие инструкции для EcoView

Бренды по названию

Популярные бренды