Siemens CS936G1.1, Руководство пользователя и инструкции по установке

Страница: 27 / 56

Cleaning function "EcoClean"
en
27
18.1 Cleaning recommendation
The appliance records the type and duration of the op-
eration and, if required, recommends which cleaning
function to use.
When you switch on the appliance, a notification ap-
pears on the display stating that you should use the
cleaning function. Start the cleaning function as soon
as possible.
You can use your appliance as normal. However, the
cleaning recommendation appears on the display until
you have run the cleaning function in full.
Note:
If the appliance is prematurely contaminated, e.g.
by greasy poultry or roasts, or if dark spots appear on
the self-cleaning surfaces, do not wait until the notifica-
tion appears on the display before you use the clean-
ing functions. The more often you use the cleaning
function, the longer the cleaning ability of the self-clean-
ing surfaces is retained.
18.2 Preparing the appliance for the
cleaning function
In order to achieve a good cleaning result, prepare the
appliance carefully.
ATTENTION!
Using oven cleaner on the self-cleaning surfaces dam-
ages the surfaces.
▶
Do not use oven cleaner on the self-cleaning sur-
faces. If oven cleaner does get onto these surfaces,
dab it off immediately using water and a sponge
cloth. Do not rub the surface and do not use abras-
ive cleaning aids.
1. Remove accessories and cookware from the cook-
ing compartment.
2. Detach the shelf supports and remove them from
the cooking compartment.
→ "Rails", Page 33
3.
Remove coarse dirt using soapy water and a soft
cloth:
– From the cooking compartment floor
– From the inside of the appliance door
– From the glass cover on the oven lamp
This prevents stains that cannot be removed.
4.
Remove any objects from the cooking compartment.
The cooking compartment must be empty.
18.3 Setting the cleaning function
Ventilate the kitchen while the cleaning function is run-
ning.
WARNING ‒ Risk of burns!
The outside of the appliance gets very hot when the
cleaning function is in progress.
▶
Never touch the appliance door.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
Note: The oven light does not light up while the clean-
ing function is running.
Requirement: → "Preparing the appliance for the
cleaning function", Page 27
.
1. Press "Cleaning".
2. Press "EcoClean".
The duration of 1 hour cannot be changed.
You can delay the time at which the operation
should be ready.
→ "Setting the end time", Page 15
3.
Press ​⁠.
a
A notification stating that you should carry out the
necessary preparatory work for the cleaning func-
tion appears on the display.
4.
Confirm the message.
a
The cleaning function starts and the duration counts
down.
a
A signal tone sounds when the cleaning function
has finished. A notification appears on the display
confirming that the operation has finished.
5.
Press ​⁠ to switch the appliance off.
6. → "Preparing the appliance after the cleaning func-
tion", Page 27 .
18.4 Preparing the appliance after the
cleaning function
1. Allow the appliance to cool down.
2. Wipe the cooking compartment with a damp cloth.
Note: Marks may appear on the self-cleaning sur-
faces. Residues of sugar and egg white in the food
are not removed and stick to the surfaces. Red
stains are residues from salty food – they are not
rust. The stains are not hazardous to health. These
marks do not impair the cleaning ability of the self-
cleaning surfaces.
3. Attach the shelf supports.
→
"Rails", Page 33