manualshive.com logo in svg

Siemens CR-IR 347, Руководство по обслуживанию, Страница: 17 / 123

Поделиться
Скачать
Siemens CR-IR 347 Скачать руководство пользователя страница 17

CR-IR347 

Service Manual

PM - 13

009-058-03
08.30.2002 FM3476

PM - 13

(4) Using the output film, check the sensitivity.

◆

 CHECK 

◆

Make sure that the S value on the film is held within the following range.
ST: 140 

≤

 S value 

≤

 260

HR: 84 

≤

 S value 

≤

 156

(5) Make sure that there is no density unbalance in the image of the output film.

◆

 CHECK 

◆

Make sure that there is no density unbalance in the main scan direction.
If any density unbalance is found, compare the films outputted from two IPs of the same
size to isolate its probable cause.

• If the density unbalance positions in the main scan direction are the same

➮ 

The culprit is an improper mounting of the light-collecting guide assembly.

• If the density unbalance positions in the main scan direction are different

➮ 

The exposure-related component(s) may be a probable cause.

FR7H6963.EPS

IP in normal orientation (first)

IP in 180-degree rotated 
orientation (second)

FR7H6964.EPS

IP in normal orientation (first)

IP in 180-degree rotated 
orientation (second)

Содержание CR-IR 347




























































































































Отзывы:

Нет отзывов