Configuration
4.3 Information required for configuration
CP 1243-7 LTE
Operating Instructions, 04/2017, C79000-G8976-C381-03
45
8.
Save and compile the project.
9.
Download the project data to the stations.
Using the "Download to device" function, the STEP 7 project data including the
configuration data of the CPs is downloaded to the relevant CPU.
You will find further information on the individual steps in the following sections and in the
help system of STEP 7.
4.3
Information required for configuration
To configure and commission the CP and the connected telecontrol system, the following
information is required:
General information
The following information is required for the STEP 7 configuration of the CP:
●
Own phone number of the CP (required for TeleService)
●
Authorized phone numbers
Call numbers of the nodes that can instigate connection establishment by the CP with an
SMS message or call.
●
APN
Name of the access point (APN) from the mobile wireless network to the Internet
(information from the mobile wireless network provider)
●
APN user name
User name for the access point of the mobile wireless network provider
●
APN password
Password for the access point of the mobile wireless network provider
●
Node number of the SMS master station (SMSC) when using SMS
●
PIN of the SIM card
Note
Configured PIN and PIN on the SIM card must match.
If you enter the PIN of the SIM card of the CP incorrectly during STEP 7 configuration and
download the station, the CP stores the wrong PIN. An incorrectly entered PIN is transferred
by the CP only once so that the SIM card is not locked.
If you change the PIN of the SIM card externally to the incorrectly configured PIN (new PIN
of the SIM card = incorrectly entered PIN in STEP 7), the CP rejects this PIN again without
checking it.
