18 / 38
Siemens
Climatix HMI-TM
CB1P3917en02
Building Technologies
3BFunctions and operations
2015-07-02
4. If the password is entered incorrectly, it will redirect to the home page as
follows, and the user level will be “Not login”.
5. When users with enough privileges press key
INFO
on page “65410”, it
will go to the defined target page.
1.
Press and hold key
ENTER
at any page, and it will activate the log in/off
page.
2.
If the password is entered correctly, the page where users activate the
password entering page will be displayed, and the corresponding user
level will be shown on the upper-right corner.
3.
If the password is entered incorrectly, it will display the following
information:
4.
Then re-enter the password. Press key
INFO
on this page, and it will
redirect to the home page.
Application engineer can configure which password can be changed by
programming in SCOPE.
If the application engineer configured that only the password of end user could be
changed,
Change service password
and
Change factory password
template
pages will not be displayed and entered. Press and hold key
ENTER
on any page
(except the error report pages), and the log in/off page will be displayed:
Entering password by
pressing key ENTER
Password
configuration
For example
