Siemens CI**R SERIES, Руководство пользователя

Страница: 14 / 17

en
14
Odours
If you experience unpleasant odours:
1. Switch the appliance off.
2. Take all food out of the appliance.
3. Clean interior (see chapter “Cleaning
the appliance”).
4. Clean all packages.
5. Seal strong smelling food in order to avoid odours
from forming.
6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation of odours is still
occuring after 24 hours.
9. Change odour filter (see chapter “Exchange
the odour filter”).
Exchange the odour filter
Spare filters are available from your dealer.
1. Open the filter holder.
2. Remove the used odour filter and replace with a new
odour filter.
3. Close the filter holder.
Light (LED)
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service
or authorised technicians only.
Tips for saving energy
ʋ
Install the appliance in a dry, well ventilated room!
The appliance should not be installed in direct
sunlight or near a heat source (e.g. radiator, cooker).
If required, use an insulating plate.
ʋ
Do not block the ventilation openings in
the appliance.
ʋ
Allow warm food and drinks to cool down before
placing in the appliance.
ʋ
Thaw frozen food in the refrigerator compartment
and use the low temperature of the frozen food
to cool refrigerated food.
ʋ
Open the appliance as briefly as possible.
ʋ
The arrangement of the fittings does not affect the
energy rating of the appliance.
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigerating units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are switching on/off.
Preventing noises
The appliance is not level
Please align the appliance with a spirit level. Use
the height-adjustable feet or place packing underneath
them.
The appliance is not free-standing
Please move the appliance away from adjacent units
or appliances.
Containers or storage areas wobble or stick
Please check the removable parts and re-insert them
correctly if required.
Bottles or receptacles are touching each other
Move the bottles or receptacles slightly away
from each other.