Siemens Arcteq AQ01, Инструкция по эксплуатации

Страница: 10 / 48

Instruction manual AQ101, AQ101D, AQ110P, AQ01 10 (48
)
Always ensure that current measurement circuits are not energized
during disconnection.
See rated voltages and connector tightening torques from chapter 7.1
“ Technical data ”.
1.2.2 AQ101, AQ101D
ARC FLASH PROTECTION RELAYS
X1
Function
X2
Function
Binary input 2 – Negative Binary input 1 – Negative
Binary input 2 – Positive Binary input 1 – Positive
Binary output 1 - +24V output Trip contact T1
Binary output 1 – GND output Trip contact T1
Sensor Channel 1 - Supply Trip contact T2
Sensor Channel 1 – Signal Trip contact T2
Sensor Channel 1 – Grounding Trip contact T3 *
Sensor Channel 2 - Supply Trip contact T3 *
Sensor Channel 2 – Signal Trip contact T4
Sensor Channel 2 – Grounding Trip contact T4
Sensor Channel 3 - Supply Self-supervision contact – normal
state
Sensor Channel 3 – Signal Self-supervision contact – failure
state
Sensor Channel 3 and 4 – Grounding Self-supervision contact – common
Sensor Channel 4 - Supply Power supply – positive
Sensor Channel 4 – Signal Power supply - negative
S5
Function
Sensor 5 – Receiver **
Sensor 5 – Transmitter **
*) Trip contact T3 may be normally open or normally closed type. Refer to the ordering codes.
**) Sensor 5 is optional for fiber sensor. Refer to the ordering codes.
See rated voltages and connector tightening torques from chapter 7.1
“ Technical data ”.