Siemens ARCADIS Avantic SP, Инструкции по запуску

Страница: 15 / 46

Siemens AG SPR2-330.815.01.01.02 ARCADIS Avantic
02.05 CS SD 24
General Startup 15
Page 15 of 46
Medical Solutions
Measuring the system leakage current
0
NOTE
Perform the system leakage current measurement only if the line
voltage on the ARCADIS Avantic system must be adapted to the lo-
cal line voltage.
See also (Notes on equivalent leakage current
measurement / p. 10) .
Measuring arrangements for system leakage current with tester VDE 0751 Octo-
ber 2001 (preferred measuring method)
0
Fig. 2: Measuring circuit for measuring the system leakage current according to the differential
current method
•
Perform measurement configuration according to (Fig. 2 / p. 15) . Application part
(1/Fig. 2 / p. 15) is not available in ARCADIS Avantic.
•
Perform measurement and repeat measurements.
•
Document the measured values in the "Leakage current test protocol", (Leakage cur-
rent measurement / p. 39) .
Measuring arrangements for system leakage current with tester VDE 0751 Octo-
ber 1990 (e.g. Bender tester)
0