Siemens Advance Network Gateway Скачать руководство пользователя страница 67

Страница: 67 / 72

2000590-001

Parts Catalog

••

Power Supply Assembly Removal

The following procedure removes the power supply assembly from the
ANG_EN enclosure.

Step

Action

Open the front panel of the ANG_EN by loosening the four
captive screws located on each corner; use 4mm Allen
wrench.

Shut off the primary AC Power Supply line to this location.
Place Power Supply toggle switch to OFF.

WARNING

Placing the Power Supply Assembly toggle On/Off switch to
OFF does not remove the main voltage to the J1 terminals.
To remove all input power to the ANG_EN, the AC Power
(Mains) to the ANG_EN needs to be shut off.

Remove Power Input Connector and Port 1&2 Connector
from board mounted connectors.

Remove Ethernet connection from the RJ-45 STP connector
(J2) on the Gateway Communication Board.

Remove the ANCB retaining bracket fastened to the chas-
sis.

Remove the 4 retaining nuts securing the Power Supply As-
sembly to the ANG_EN.

Lift the Power Supply Assembly up and out of the ANG_EN.

Instructions

Содержание Advance Network Gateway









































































Результаты поиска

Содержание Advance Network Gateway

Отзывы:

Siemens Advance Network Gateway, Руководство пользователя, Страница: 67 / 72

Результаты поиска

Содержание Advance Network Gateway

Отзывы: