Administration
A31003-D3000-M100-01-76A9, 02-2013
146
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
Fixed Function Keys
The Free Programmable Keys (FPKs) can be programmed on two separate
levels (Normal and Shift level) but if you reset the phone, the keys in the first level
will be reset to the default factory settings.
INFO:
To use the second (shifted) level, a Shift key is necessary
to switch between the two levels. Therefore, 1 of 3 FPKs needs to
be programmed as Shift key, and only 2 FPKs remain available for
other functions.
Related Topics
3.10 Fixed Function Keys
For the
Conference
call key, the
Transfer
key, and the
Hold
key, specific SIP or
HTTP based functions can be defined. If you reset the phone, these three keys
will be reset to the default factory settings.
The other fixed function keys (
Messages, Settings, Speaker, Transfer,
Headset, Vol.+, Vol.- and Mute
) cannot be programmed with specific functions.
Administration via WBM
In the WBM
Administrator
pages, navigate to
System > Features > Fixed keys
.
To assign a new function to a key, select a function from the drop down list. To
view or modify the parameters associated with the key, use the
Edit
button. Click
Submit
to save your changes.
Related Topics
3.11 Multiline Appearance/Keyset
A phone that has more than one line associated to it, and therefore works as a
multiline phone, is referred to as "keyset". The lines are assigned to the phone by
setting up a separate line key for each line.
The multiline appearance feature allows for multiple lines to be assigned to a
keyset and for a line to be assigned to multiple keysets. This feature requires
configuration in OpenScape Voice and in the telephone, and is particularly useful
for executive-assistant arrangements.
In order to configure the phone as a keyset, it is required to
•
use an outbound proxy (System > SIP interface > Outbound proxy, see
Outbound Proxy
), and
•
set the server type to "OS Voice" (System > Registration > Server type, see
SIP Registration
).
