7 | Installation
58/174
8DJH • Installation and Operating Instructions • Version 11 • 500-8384.9
7.10 Removing the transport eyes and transport blocks
On panels with pre-assembled low-voltage compartments, up to 2 transport blocks are mounted.
The transport blocks can be removed before installation work is started. The transport eyes must
be removed before installation work is started.
1. Unscrew the bolted joint and remove the transport eyes and/or transport blocks.
4x
4x
Fig. 34:
Removing transport blocks
Fig. 35:
Removing transport eyes
1
Transport block
2
Transport eye
7.11 Installing the pressure relief duct for the pressure absorber system (IAC
up to 16 kA)
The pressure relief duct for panel blocks with IAC A FLR up to 16 kA/1s (option) is pre-assembled
at the factory as standard. The pressure relief duct can be supplied separately on request.
Fig. 36:
Mounted pressure relief duct
1
Pressure relief duct
Содержание 8DJH
Страница 173: ......