Siemens 8DJH Скачать руководство пользователя

Страница: 153 / 174

Operation | 9

153/174

500-8384.9 • Version 11 • Installation and Operating Instructions • 8DJH

3. Push the locking device upwards, and hold it.

✓ The actuating opening of the disconnector is

open.

0000

4. Insert the operating lever and turn clockwise as far

as it will go.

✓ The position indicator of the disconnector shows

the CLOSED position.

0000

5. Remove the operating lever.

✓ The locking device returns to its initial position.

6. Fit the padlock (optional) on the locking device at

the desired position [

▶

Page 137, "Mechanical

interlocking with padlock"].

✓

The three-position disconnector is in CLOSED
position.

0000

9.7.5 L1.1: Switching the three-position disconnector from CLOSED to OPEN position

☒ Circuit-breaker in OPEN position
☒ Three-position disconnector in CLOSED position
1. Check service readiness [

▶

Page 135, "Ready-for-

service indicator"].

2. Remove the padlock (optional) from the locking

device.

0000

3. Push the locking device upwards, and hold it.

✓ The actuating opening of the disconnector is

open.

0000

4. Insert the operating lever and turn counter-clockwise

as far as it will go.

✓ The position indicator of the disconnector shows

the OPEN position.

0000

5. Remove the operating lever.

✓ The locking device returns to its initial position.

6. Fit the padlock (optional) on the locking device at

the desired position [

▶

Page 137, "Mechanical

interlocking with padlock"].

✓

The three-position disconnector is in OPEN position.

0000

Содержание 8DJH















































































































































































Результаты поиска

Содержание 8DJH

Отзывы:

Похожие инструкции для 8DJH

Бренды по названию

Популярные бренды

Siemens 8DJH, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 8DJH

Отзывы:

Похожие инструкции для 8DJH

Бренды по названию

Популярные бренды