Siemens 7XV5450-0 A00 Series Скачать руководство пользователя страница 5

 

 
 

 

1.2 Safety 

Notes 

 
These operating instructions contain notes that are to be complied with 
for your personal safety as well as to avoid property damages. These 
notes are marked by a triangular warning symbol and the different 
degrees of danger are categorized as follows:  
 

 

Danger 

Disregard of the corresponding precautionary 
measures will cause death, severe bodiliy injury or 
considerable property damage.  

 
 

 

Warning 

Disregard of the corresponding precautionary 
measures may cause death, severe bodiliy injury 
or considerable property damage.  
 
 

 

Attention 

Disregard of the corresponding precautionary 
measures may lead to slight bodiliy injury or minor 
property damage  
 
 

 

Note 

Shall draw your attention to special information on 
the product, product handling or the corresponding 
section of the documentation. 

 
 

 Qualified 

personnel

 

Commissioning and operation of the equipment is 
to be performed by qualified personnel only. In the 
context of safety notes in this manual, the term 
qualified personnel refers to persons authorized to 
perform commissioning, grounding and labelling of 
devices, systems and electrical circuits. 
 

 

19.10.2006 

Mini-Starcoupler 

Page 5 of 28

 

Содержание 7XV5450-0 A00 Series





























Отзывы: