Siemens 7KT0310, Руководство пользователя, Страница: 12 / 21

12
SMART 7KT0310 Manual
Parameterization with function keys
Config.
page
Function Range or Selection
Factory
Setting
Password 0000 to 9998 1000
1 Change Password No / Yes No
1.1 New Password 0000 to 9998 1000
2 Network
Selection
3P4W, 3P3W, 1P2W-P1,
1P2W-P2 and 1P2W-P3
3P4W
3 CT Secondary 1A or 5A 5
4 Ct Primary 1A, 5A to 10,000A 5
5 Pt Secondary 100V to 500V 350
6 Pt primary 100V to 500kV 350
7 Slave Id 1 to 255 1
8 Baud Rate 300, 600, 1200, 2400,
4800, 9600 and 19200
(bps)
9600
9 Parity None, Odd, Even None
10 Stop Bit 1 or 2 1
11 Back Light 0 to 7200 sec. 0000
12 Demand interval
method
Sliding / Fixed Sliding
13 Demand interval
duration
1 to 30 15
14 Demand interval
length
1 to 30 min 1
15 Max Page Auto 1 to 22 22
16 Change Page
Sequence
No / Yes No
16.01 Page sequence 1 1 to 22 1
16.02 Page sequence 2 1 to 22 2
16.03 Page sequence 3 1 to 22 3
16.04 Page sequence 4 1 to 22 4
16.05 Page sequence 5 1 to 22 5
16.06 Page sequence 6 1 to 22 6
16.07 Page sequence 7 1 to 22 7
16.08 Page sequence 8 1 to 22 8
16.09 Page sequence 9 1 to 22 9
16.10 Page sequence 10 1 to 22 10
Config.
page
Function Range or Selection
Factory
Setting
16.11 Page sequence 11 1 to 22 11
16.12 Page sequence 12 1 to 22 12
16.13 Page sequence 13 1 to 22 13
16.14 Page sequence 14 1 to 22 14
16.15 Page sequence 15 1 to 22 15
16.16 Page sequence 16 1 to 22 16
16.17 Page sequence 17 1 to 22 17
16.18 Page sequence 18 1 to 22 18
16.19 Page sequence 19 1 to 22 19
16.20 Page sequence 20 1 to 22 20
16.21 Page sequence 21 1 to 22 21
16.22 Page sequence 22 1 to 22 22
17 Factory default No / Yes No
18 Reset energy and
MAX demand
No / Yes No
18.1 Password 0001 to 9999 1001
18.01 1) Reset active
energy
No / Yes No
18.02 Reset reactive
energy
No / Yes No
18.03 Reset apparent
energy
No / Yes No
18.04 Reset MAX No / Yes No
18.05 Reset ON hour No / Yes No
NETWORK SELECTION and WIRING INPUT
Network selection in
configuration mode
Wiring
3P4W 3P4W, 2P3W
3P3W 3P3W
1P2W (P1/P2/P3) 1P2W (P1/P2/P3)
Note: P1, P2 and P3 are Three Phase.
1) For resetting energy parameters user will be prompted the
password. If correct password is entered, the user will be able to
reset all energy parameters. This password will be value which
will be greater than the configuration password by 1.