manualshive.com logo in svg

Siemens 6ES7647-0BA00-0YA2, Руководство по эксплуатации

Поделиться
Скачать
Siemens 6ES7647-0BA00-0YA2 Скачать руководство пользователя страница 25

Installing and connecting the device 

3.3 Connecting the device 

SIMATIC IOT2050 
Operating Instructions, 03/2020, A5E39456816-AA 

25

 

NOTICE 
Damage through regenerative feedback 
Regenerative feedback of voltage to ground by a connected or installed component can 

damage the device. 
Connected or built-in I/Os, for example, a USB drive, are not permitted to supply any 

voltage to the device. Regenerative feedback is generally not permitted. 

NOTICE 
Ferrite required at USB cables 
The interference immunity of the device according to the data in the technical specifications 

is only guaranteed when the cables at USB and micro USB ports are equipped with a ferrite 

magnet. Use only USB cables equipped with a ferrite magnet. 

3.3.2

 

Connecting the function earth 

A connected function earth discharges electrical charges from the metal enclosure. 
The function earth also improves the discharge of interference generated by external power 

cables, signal cables or cables for I/O modules to ground. 
The connection for the function earth is labeled with the following symbol: 

WARNING 

Electric shock and risk of fire 
High voltage may be present in a defective device, which can cause fire or an electric 

shock if touched. This can result in death and serious injury. 

•

Connect the device to the function earth before you put it into operation.

•

The function earth terminal on the device must be connected to the function earth of the

control cabinet or system in which the device is installed.

•

Never operate the device without function earth.

•

If a device is defective, remove it from operation without delay and label it accordingly.

Содержание 6ES7647-0BA00-0YA2








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды