manualshive.com logo in svg

Siemens 3AH37, Руководство по эксплуатации, Страница: 32 / 64

Поделиться
Скачать
Siemens 3AH37 Скачать руководство пользователя страница 32

Description

32

9229 9992 176 0D

2013-07-08

Interlocking devices

To lock vacuum circuit-breakers as a function of the switching position, the spring
drive mechanisms of the vacuum circuit-breaker can be equipped with an
interlocking device. This is also the case for vacuum circuit-breakers on switch gear
trucks, in withdrawable sections or with disconnectors.

Conditions

The vacuum circuit-breaker must only be switched on in operating or disconnected
position. The operating or disconnected position is the position of the vacuum circuit-
breaker on the switchgear truck or withdrawable section in the switchgear. At the
same time, the vacuum circuit-breaker may be moved on the switchgear truck or
withdrawable section only when it is open.

Positions of the vacuum circuit-breaker in the switchgear

Disconnected position

The isolating distance between the vacuum circuit-breaker contacts and the
switchgear counter-contacts is attained fully.

Operating position

The circuit-breaker is inserted fully into the switchgear and the vacuum circuit-
breaker contacts overlap completely with the switchgear counter-contacts.

Mechanical interlock (optional with spring drive mechanism)

An interrogation and actuation component (b) on the system side scans the
operating position (CLOSED/OPEN) of the vacuum circuit-breaker.

CLOSED position

If the vacuum circuit-breaker is closed, actuation of the system's interrogation and
actuation component (b) is prevented. A mechanical system in the switchgear truck
or withdrawable section reliably blocks movements of the circuit-breaker on the
switchgear truck or withdrawable section.

OPEN position

If the vacuum circuit-breaker is open, the interrogation and actuation component (b)
on the system side actuates, via the stroke (a), the vacuum circuit-breaker's
mechanical interlock and reliably blocks closing of the vacuum circuit-breaker.

Fig. 43

Mechanical interlock

The installation dimensions (c + d) for the interrogation and actuation component (b)
are in the dimension drawing.

X

CLOSED position

a 

Stroke (min. 10 mm, max. 30 mm)

Y

OPEN position

b 

Interrogation or actuation component (min. actuation force 70 N)

Z 

View from below

c + d 

see dimension drawing

Содержание 3AH37

































































Отзывы:

Нет отзывов