Siemens Nixdorf D756 Скачать руководство пользователя страница 20

Страница: 20 / 23

Error messages

This chapter contains the error messages generated by the system board.

Access Denied - System Halted

You have entered an illegal password 3 times. Restart the PC.

Access to Setup Denied - Press Any Key to Continue

You have entered an illegal password 3 times. Press any key.

CMOS RAM ERROR, CHECK BATTERY/RUN Setup

Check all the entries in the setup menu. If this error occurs each time the PC
is powered up, contact your customer field service.

DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER

Insert the operating system floppy disk in the drive and press the Enter key.
Check the entries for the floppy and hard disk types in the setup menu.

DISKETTE DRIVES OR TYPES MISMATCH ERROR - RUN Setup

Check the drive type entered in the

Diskette

field of the setup menu and also

the connections for the floppy disk drive.

ERROR ENCOUNTERED INITIALIZING HARD DRIVE

Check the hard disk type entered in the

Hard Disk 1

and

Hard Disk 2

fields of

the setup menu and also the connections and U-plugs on the hard disk drive.

ERROR INITIALIZING HARD DISK CONTROLLER

Contact your customer field service.

FLOPPY DISK CNTRLR ERROR OR NO CNTRLR PRESENT

Check the entry in the

Diskette

field of the setup menu and also the

connections and U-plugs on the floppy disk drive.

Incorrect Password

You have entered an illegal password. Enter the password again and press
the Enter key.

IO PARITY ERROR - SYSTEM HALTED

Restart your PC. Should the error recur, contact your customer field service.

KEYBOARD ERROR OR NO KEYBOARD PRESENT

Check whether a key is sticking and whether the keyboard is connected
correctly.

MATH COPROCESSOR ADDED/REMOVED - RUN Setup

Call up the setup menu and confirm with the

F10

and

keys the entry in

the

COPROCESSOR INSTALLED

field.

A26361-D756-Z120-1-7619

Error messages

MEMORY PARITY ERROR AT AA:SSSS:OOOO FOUND FFFF EXPECTED EEEE

Restart your PC.

MEMORY SIZE ERROR - RUN Setup

Call up the setup menu and confirm with the

F10

and

keys the entries in

the

Base Memory

and

Extended Memory

fields.

MEMORY VERIFY ERROR AT AA:SSSS:OOOO FOUND FFFF EXPECTED EEEE

Restart your PC.

Passwords entered do Not Match

You have confirmed an illegal password. Enter the password again and
press the Enter key.

RAM PARITY ERROR. CHECKING FOR SEGMENT ADDRESS ...

OFFENDING SEGMENT: SSSS

Restart your PC.

RAM PARITY ERROR. CHECKING FOR SEGMENT ADDRESS ...

OFFENDING ADDRESS NOT FOUND

Restart your PC.

REAL TIME CLOCK ERROR - RUN Setup

Call up the setup menu and enter the correct time in the

Time

field.

REFRESH TIMING ERROR

Contact your customer field service.

Security Features Not Changed - Press Any ey to Continue

You have confirmed an illegal password 3 times. No password is assigned.
Press any key.

VIDEO EQUIPMENT CONFIGURATION ERROR - RUN Setup

The entry in the

Video Display

field of the setup menu is incorrect. Correct the

entry or the U-plug for the primary monitor.

A26361-D756-Z120-1-7619

Содержание D756
























Результаты поиска

Содержание D756

Отзывы:

Похожие инструкции для D756

Бренды по названию

Популярные бренды

Siemens Nixdorf D756, Техническое руководство

Результаты поиска

Содержание D756

Отзывы:

Похожие инструкции для D756

Бренды по названию

Популярные бренды