Siemens Mobile TC45, Руководство пользователя

Страница: 314 / 461

TC45 AT Command Set
12.11 AT+CNMI
s
m
obile
TC45_ATC_V02.02 Page 314 of 461 4/16/04
Confidential / Released
2 Buffer unsolicited result codes in the TA when TA-TE link is reserved (e.g. in
on-line data mode) and flush them to the TE after reservation. Otherwise for-
ward them directly to the TE.
3 Forward unsolicited result codes directly to the TE. TA-TE link specific inband
technique used to embed result codes and data when TA is in on-line data
mode.
Rules for storing received SMS depend on the relevant data coding method (refer to GSM 03.38), preferred
memory storage (
AT+CPMS
) setting and this value.
Note: If AT command interface is acting as the only display device, the ME must support storage of class 0 mes-
sages and messages in the message waiting indication group (discard message)
[0]
(&F)
No SMS-DELIVER indications are routed to the TE.
1 If SMS-DELIVER is stored in ME/TA, indication of the memory location is
routed to the TE using unsolicited result code:
2 SMS-DELIVERs, except class 2 messages and messages in the message
waiting indication group (store message) are routed directly to the TE using
unsolicited result code:
3 Class 3 SMS-DELIVERs are routed directly to the TE using unsolicited result
codes defined in
<mt>
=2. Messages of other data coding schemes result in
indication as defined in
<mt>
=1.
Rules for storing received CBMs depend on the relevant data coding method (refer to GSM 03.38), the setting
of Select CBM Types (
AT+CSCB
) and this value:
[0]
(&F)
No CBM indications are routed to the TE.
2 New CBMs are routed directly to the TE using unsolicited result code:
3 Class 3 CBMs are routed directly to TE using unsolicited result codes defined
in
<bm>
=2.
[0]
(&F)
No SMS-STATUS-REPORTs are routed to the TE.
1 SMS-STATUS-REPORTs are routed to the TE using unsolicited result code:
2 If SMS-STATUS-REPORT is routed into ME/TA, indication of the memory
location is routed to the TE using unsolicited result code:
[1]
(&F)
TA buffer of unsolicited result codes defined within this command is cleared
when
<mode>
1...3 is entered.
integer type; value in the range of location numbers supported by the associated memory
Notes
• Each time an SMS or Cell Broadcast Message is received, the Ring Line goes Logic "1" for one second.
<mt>
(num)(&W)(&V)
<bm>
(num)(&W)(&V)
<ds>
(num)(&W)(&V)
<bfr>
(num)(&W)(&V)
<index>
(num)