Siel EXC-GT Series, Руководство пользователя и по обслуживанию

Страница: 6 / 98

EXC-GT – FM super-compact transmitter series
User’s manual – Page 6 of 98
2 S
AFETY FIRST
!
2.1 Symbols used
For quick reference, we used symbols that attract immediate attention, and which simply and efficiently advise and inform the user.
,
The symbol of the open hand stresses a description of the highest importance concerning technical assistance,
dangerous situations, safety warnings, advice, and/or information of the highest importance. Where such symbol is
not heeded, serious problems/consequences may arise.
The written notebook represents practical, important advice that we recommend be followed in order to obtain the best possible
performance from the device.
The display messages (menu, options, etc.) are written
in this font
(Courier New).
Important sentences and words are underlined.
For ease of reference, cross references to sections, chapters, page numbers, diagrams, etc. may be indicated using the
2
symbol.
For example: “
2
3.1” means “refer to section 3.1”
2.2 Warnings
,
Before connecting or using this device, carefully read all instructions contained in this manual, in the order in which
they are written. Cross references to sections and chapters were created exclusively for ease of use. Keep this
manual in a safe place for future reference.
,
IMPORTANT: Improper use or installation of this device could cause serious damage to objects and people alike.
Therefore, it is essential to rely on an installer who has been previously authorized or approved by Siel, or by our local
representative, and that both the user and the installer read the entire manual before carrying out any operation.
,
All warnings included in this manual must be strictly followed to avoid damages to both the device and the operator.
Read and follow all instructions indicated on warning labels or affixed to the device and its accessories.
,
The EXC-GT Series family of transmitters has characteristics common to all its models. However, each version is
equipped with a different transmission power, and characteristics specific to the series or options that make it unique.
For this reason, it is important to verify the exact model of your device, as explained in detail later in this manual.
,
Depending on the model used, the device may be of a weight such as does not permit it to be moved by a single
person and without the proper equipment. In this case, the transmitter should only be moved exclusively with the
proper equipment and having taken the proper precautions. The same is true for various internal parts. In case of
doubt, contact Siel.
,
Do not turn on the device without having duly wired and connected it, as explained in Chap. 6.
,
Always follow the laws and regulations stipulated regarding the use of broadcast transmitters, as in effect in the
geographical area in which you are operating.
This manual describes in detail the menus that appear on the LCD display: as the software is continually updated, some of the
screens shown in the chapters below may be different than those that appear on your device. In case of doubt, contact Siel.