Siel EXC-GT Series, Руководство пользователя и по обслуживанию

Страница: 30 / 98

EXC-GT – FM super-compact transmitter series
User’s manual – Page 30 of 98
3) Turn the knob to select the desired sub-menu, then confirm by briefly pressing the knob. In the example below, the screen for
the
FREQUENCY
sub-menu is shown.
4) At this point, depending on the main menu that you have accessed, various options may be available. Each option is
explained in detail in the following chapter, and a brief overview is provided below:
o
VIEW
menu – used to check the device’s operating parameters and alarms/events; as such, options are not
usually available in its sub-menus. Once you have accessed a sub-menu, turning the knob has no effect, with the
exception of the
MPX GRAPH
and
VIEW LOG
sub-menus. For further details regarding the use of these sub-
menus, refer to sections 10.2.d and 10.2.h.
o
SETUP
menu – this was expressly designed to set the transmitter’s parameters; as such, the options
EDIT
,
ABORT
, and
OK
are available in all the sub-menus. Refer to section 9.4 regarding the use of these options.
5) Where required, use the knob according to the instructions provided in each of the following descriptions of the individual
sub-menus.
6) To go back to the previous level (and exit the current menu/sub-menu), press the ESCAPE button.
7) Where necessary, repeat the previous step multiple times until you return to the main screen, indicated in step 1.
Access to the
VIEW
and/or
SETUP
menus may be password protected. If so, you may need to enter a previously assigned
password at step 2. For further details regarding passwords, refer to section 10.3.k.
9.4 Additional commands in the SETUP menu
9.4.a NEXT PAGE and PREV PAGE
The
SETUP
menu is composed of multiple pages; as such, you can access the next page by selecting the
NEXT PAGE
sub-menu,
and the previous page by selecting
PREV. PAGE
.
9.4.b EDIT, ABORT, and ESCAPE
Once you’ve entered one of the sub-menus in the
SETUP
menu, turning the knob allows you to select three commands that appear
at the bottom of the screen:
š
EDIT
- used to access a setting and modify parameters.
š
ABORT
– used in the same manner as pressing the ESCAPE button, and thus to exit the screen and return to the previous
navigation level without saving any settings made in that sub-menu.
š
OK
– confirms settings made in a sub-menu.