siegling blizzard HC120/40, Руководство пользователя

Страница: 14 / 30

14
Error Error Error
Message Name Description Remedy
E001 HEaTERS_DRIVInG_CIRCUIT The heating plates are over 260 °C
E002 nO_HEaTInG_UP Heating plates are not heating up
E003 HEaT_UP_TOO_SLOW Heating plates are heating up too slowly
E004 EEPROM_REaD Calibration offset is out of the ±100 °C range
E005 COOLInG Cooling is too slow
E006 TOP_SIDE_HEaTERS The top side heating plate does not heat up properly
E007 BOTTOM_SIDE_HEaTERS The bottom side heating plate does not heat up properly
E008 TOP_SIDE_FanS The top side heating plate does not cool down properly
E009 BOTTOM_SIDE_FanS The bottom side heating plate does not cool down properly
4.6 Error during heating clamp operation
The heating clamp is equipped with error diagnostics. If an error occurs during operation, an error code appears in
the display.
– When an error occurs, acknowledge it with any button.
Following acknowledgment, the control unit on the device attempts to resume the current mode at the spot in
which the error occurred.
– If the error occurs again: Let the heating clamp cool down completely and restart.
– If the error occurs again: Make a note of the error code, switch the device off and disconnect it from the power supply.
Send the device, including the error code, to Forbo Customer Service for servicing.
allow the heating clamp to cool
down completely and restart.
If the error occurs again:
Send heating clamp including
error message to Forbo
Customer Service.