siegling blizzard HC120/40, Руководство пользователя

Страница: 10 / 30

10
4 OPERaTIOn
4.1 Prepare device and workstation
– Ensure that the workstation is clean and tidy.
a heat-resistant surface on which to safely place the Siegling Blizzard heating clamp during operation must be available.
Stop
The device is not splash-proof. The device is not explosion-proof.
Operation under improper conditions can lead to serious damage to the device and injury to the operator
(electric shock, burns, explosion damage).
– Carefully check the heating clamp and power cable for damage (visual inspection).
The Siegling Blizzard heating clamp may only be operated if it is in faultless condition.
Stop
Operating a damaged device can cause further damage to the device and result in injury to the user (electric shock,
burns, crushing, cuts).
– Ensure that both heating plates are free of dirt and deposits.
Carefully remove any dirt or deposits by wiping with a clean cloth moistened with ammonia.
Stop
Clean heating plates only when cold and do not use flammable cleaning solutions.
Risk of severe burns and high fire risk!
4.2 Connect to the power supply
– Compare the connection values of your heating clamp to those of the power supply.
– Only connect to the power supply if the values are the same 230 V / 50 Hz or 115 V / 60 Hz.
Caution
Operating the heating clamp with the wrong voltage can cause serious damage to the device.
Caution
avoid connecting the heating clamp to machine sockets.
Potential problem: When starting up the machine there is a risk of voltage peaks,
which may damage the heating clamp electronics.
Action: Connect the heating clamp to an on-site power supply.