Siegenia AEROMAT mini, Инструкция по установке и эксплуатации

Страница: 12 / 16

AEROMAT mini Installation and operating instructions
12 06.2016
Installation of the turn lock
Assembly requirements
• The AEROMAT mini must be preassembled (installation AEROMAT mini, see page 6).
• A 90° limit stay must be installed for aluminium windows with SIEGENIA hardware and surface
mounted hinge side.
• When using hardware made by third-party manufacturers, make sure that the turn lock does not
collide with the sash before installation.
• For windows with concealed bottom and top hinges, the turn lock must be installed horizontally or
vertically at the top of the locking side.
Installation steps
1. Mark the fixing holes (from the edge of the window frame to the centre hole: observe X dimension)
and drill
2. Push the turn lock bracket under the sealing lip of the air outlet AEROMAT mini.
3. Fix the bracket using suitable sash lifter screws (e.g. 4 x 35 mm, not included in the scope of delivery)
1.
2.
3.
4. Clamp turn lock into the bracket.
5. Attach operating sticker to the window near to the turn lock.
4.
5.
Timber/PVC X = 20