BAL XC420 2.00
42/47
Bluetooth-connection
For displays of type ...-04 the configuration can additionally be done via Bluetooth.
This exemplarily describes the Bluetooth installation and the connection with a Siebert display for a
Bluetooth USB adapter.
This requires that the Bluetooth USB adapter is used with the standard Windows drivers and no
additional driver software is required. If your Bluetooth USB adapter requires special drivers observe
the documentation of your adapter.
Installation
Plug the Bluetooth USB adapter into an available USB port of your PCs and wait for the automatic
hardware recognition from Windows. After the message 'The device was installed and is ready to use'
the Bluetooth symbol appears in the taskbar.
Once the Bluetooth USB adapter is successfully installed the coupling (pairing) between the Bluetooth
module of the display and the Bluetooth USB adapter has to be established.
The coupling is absolutely necessary so that the 'SolarDisplayConfigurator' is connected via a virtual
COM port.
Coupling via Windows 10
Establish the coupling
Open the Windows settings (p.e.: Windows- i) and after select the point 'devices'.
Find your Bluetooth adapter under 'Other devices'.
To connect the Bluetooth adapter to the display, click on 'Add Bluetooth or other device'.
