BAL XC420 2.00
41/47
Complete configuration
In this step you transfer the previously made settings to the display.
Click 'Next' to start the transfer of the configuration. After successful configuration of the display the
shown dialog box appears.
Then click 'OK', this ends the 'SolarDisplayConfigurator' and the display is successfully configured.
If you have configured a virtual display the settings are saved in a configuration file and the memory
location is shown in a display box.
IP address
Make sure that your PC and the display are in the same network segment. Displays outside the network
segment of your PC are recognized, but a connection is not possible. If necessary adjust the IP address of
your PC to the IP address of the display.
