BAL SX602 PFN RT
24/36
Pos : 81 /Si ebert /Bedi enungsanlei tungen/ Seri e SX502 / SX602/ Par ametrierung/ÜBS Parametrier ung @ 0 \ mod_1318507141653_48. doc x @ 3216 @ 1 @ 1
10 Parameterization
Pos : 82 /Si ebert /Bedi enungsanlei tungen/ Seri e SX502 / SX602/ Par ametrierung/Bus fehler/ SX502 Busf ehler ETH/ IP, MDB TCP, PFN RT, SX602 PFN RT @ 2\ mod_1401457056238_48. doc x @ 8797 @ @ 1
Bus errors may result in personal injury or material damage. Therefore it must be noted that
activating the menu can cause a bus error.
Pos : 83 /Si ebert /Bedi enungsanlei tungen/ Seri e SX502 / SX602/ Par ametrierung/Menü/M enü SX502 DVN, ETH, IBSPD G WY MDB,MDBTC P,MD BTCPG WY, PF B, PFN IRT ,PFN RT, SER , SX602 PFN RT @ 2\ mod_1399035430346_48.doc x @ 8303 @ 2 @ 1
Menu
The parameterization of the devices is carried out in a menu in the menu display.
In normal operation, status messages appear in the menu display (see Chapter 4).
Pos : 84 /Si ebert /Bedi enungsanlei tungen/ Seri e SX502 / SX602/ Par ametrierung/Menübedienung/M enübedienung SX502 D VN, ETH, ETH/ IP, IB SPD G WY,MDB,MDBTC P,MD BTCPG WY, PF B, PFN IRT ,PFN RT, SER s. u. @ 2\ mod_1399035458473_48. doc x @ 8310 @ 2 @ 1
Menu operation
To start the menu, press both menu buttons simultaneously (approx. 1 sec.) until the first menu item
appears in the menu display. It is now possible to navigate in the menu as follows:
Next menu items forward
Press key [
] long
Page menu items forward
Shortly press key [
]
Previous menu item
Double-click on key [
]
Page menu items backward Double-click on key [
] and keep it pressed
Next setting
Shortly press key [
]
Page settings forward
Press key [
] long
Previous setting
Double-click on key[
]
Page setting backward
Double-click on key [
] and keep it pressed
To exit the menu shortly press the key [
] in menu item 99. Depending on the setting in menu item 99
the settings made are either saved (set) or not saved (escape) or the factory settings are reset
(default).
Canceling the menu without saving the settings made is possible by pressing both menu buttons
simultaneously (approx. 1 sec.). It will occur automatically if 60 seconds pass without a menu button
being pressed.
Once the menu is closed, the device behaves in the same manner as when the operating voltage was
applied.
Pos : 85 /Si ebert /Bedi enungsanlei tungen/ Seri e S302/SX302 SX502 SX 602 Überei nsti mmung en/Parametrier ung Gross anz eigen Überei nsti mmung versc h. Serien/Menüt abelle Ei nleit ungssat z S302 all e(auss er WTH) SX502 D VN, ETH, ETH/I P, IBSPD G WY,MD B, PF B,SER @ 0\ mod_1315484703273_48.doc x @ 1474 @ 2 @ 1
Menu table
The menu items are displayed in the following menu table. The factory settings are marked with an *.
Individual menu items or settings can be suppressed in another menu item, depending on the unit
version or setting.
Pos : 86 /Si ebert /Bedi enungsanlei tungen/ Seri e SX502 / SX602/ Par ametrierung/Menüt abellen/ SX602 Menütabelle PFN RT @ 3 \ mod_1465993515820_48. doc x @ 26033 @ @ 1
Menu item
Settings
Display
00
Fieldbus interface
Normal operation mode*
Restore to factory settings (Default)
01
Operation mode
Dynamic and static texts
Quick call of static texts
02
No. of output data bytes
8*
16
32
64
10
Time-out
No time-out*
Time-out after 1 s
Time-out after 3600 s
