manualshive.com logo in svg

SICK WI180C-PB, Руководство по эксплуатации

Поделиться
Скачать
SICK WI180C-PB Скачать руководство пользователя страница 5

W I 1 8 0 C - P B   |   P R O F I B U S   C O U P L E R

8018416.YM10/COMAT/ 2015-03-13 | S I C K   A G

Subject to change without notice

5

1

ABOUT THIS DOCUMENT

1 

About this document

Read these operating instructions carefully before you mount and commission the 

WI180C-PB.

1.1 

Purpose of this document

These operating instructions contain information required during the life cycle of the 

WI180C-PB and its variants WI180C-PB(Sxx).
These operating instructions must be made available to all those who work with the 

WI180C-PB(Sxx).
Please read these operating instructions carefully and make sure that you understand 

the content fully before working with the WI180C-PB(Sxx).

1.2 

Target group

These operating instructions are intended for the following target groups: Project devel-

opers (planners, developers, designers), installers, electricians, programmers, opera

-

tors and maintenance personnel.
The structure of these operating instructions is based on the life-cycle phases of the 

WI180C-PB: Project planning, mounting, electrical installation, commissioning, opera

-

tion, maintenance and disposal.

1.3 

Information depth

These operating instructions contain information about the following topics relating to 

the WI180C-PB(Sxx):

 

−

Product description

 

−

Mounting

 

−

Electrical installation

 

−

Commissioning and configuration

Furthermore, when planning and using sensors such as the WI180C-PB(Sxx), technical 

expertise is required, which is not covered in this document.
Official and legal regulations for operating the WI180C-PB(Sxx) volume measurement 

system must always be complied with.

You can find further information on the Internet at 

www.sick.com

.

1.4 

Symbols used

Symbol

Meaning

This symbol indicates a hazard where the product may be damaged by 

improper handling.

This symbol refers to a hazard due to electrical charge which may 

damage the product.

This symbol precedes a note containing important additional informa-

tion.

Содержание WI180C-PB

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды