Contents
1
About this document........................................................................
1.1
Information on the operating instructions..............................................
1.2
Explanation of symbols............................................................................
2
Safety information............................................................................
2.1
2.2
2.3
Internet protocol (IP) technology..............................................................
2.4
2.4.1
Programmable device..............................................................
2.5
Modifications and conversions................................................................
2.6
Requirements for skilled persons and operating personnel..................
2.7
Operational safety and particular hazards..............................................
3
Product description........................................................................... 10
3.1
3.2
Setup and dimensions.............................................................................
3.3
Display and operating elements..............................................................
3.4
3.5
Product identification...............................................................................
3.6
3.7
3.7.1
Measurement principle...........................................................
3.7.2
Range finding...........................................................................
3.7.3
Direction measurement..........................................................
3.7.4
Object sizes..............................................................................
3.7.5
Impact of object surfaces on the measurement...................
3.7.6
Scanning range........................................................................
4
Transport and storage....................................................................... 20
4.1
Transport...................................................................................................
4.2
Unpacking.................................................................................................. 20
4.3
4.4
5
Mounting............................................................................................. 21
5.1
5.2
5.3
6
Electrical installation........................................................................ 23
6.1
Prerequisites for safe operation of the device........................................
6.2
Electrical block diagram for commissioning...........................................
6.3
Wiring notes..............................................................................................
6.4
Connection diagram.................................................................................
CONTENTS
8024355/15I9/2019-09-30 | SICK
O P E R A T I N G I N S T R U C T I O N S | TiM8xxP
3
Subject to change without notice