The required pin assignments can be found in the data sheets for the peripherals to be
connected as well as in the relevant connection descriptions,
.
1.
If necessary, assemble connection cables,
2.
Connect the cables to peripheral devices.
3.
Route the cables to the device using installation materials (cable channels, cable
ties, etc.). When doing so, pay attention to cable strain relief.
4.
Connect cables to the relevant device connections.
5.
Seal unused connections with dummy plugs.
6.7
Connecting voltage supply
NOTICE
Risk of damage to peripheral devices!
If peripheral devices are connected when the voltage supply is also applied, these
devices can become damaged.
■
Only connect peripheral devices when the voltage supply is disconnected.
1.
Ensure that the voltage has been disconnected by the user.
2.
Connect voltage supply cable(s) to the device.
3.
Lay the cable(s) with strain relief.
4.
Have the user connect the voltage supply.
5.
Have the user activate the voltage.
ELECTRICAL INSTALLATION
6
8026126//2020-10-15 | SICK
O P E R A T I N G I N S T R U C T I O N S | SIM200
19
Subject to change without notice
