2
Safety information
2.1
Basic safety instructions
DANGER
Danger of electric shock due to electrical voltage. Contact will result in death, burns or
shock.
b
Electrical work may only be performed on the system by qualified specialist per‐
sonnel.
b
Interrupt the voltage supply.
b
Check residual voltage on the system components.
b
Use extra caution.
b
Always connect equipotential bonding (earthing).
b
Ensure that the ground potential is the same at all grounding points.
b
Do not disconnect or remove the protective conductor.
WARNING
Risk of injury and damage caused by electrical current
Due to equipotential bonding currents, incorrect earthing can lead to the following
dangers and faults: Voltage is applied to the metal housing, cable fires due to cable
shields heating up, the product and other devices become damaged.
b
Generate the same ground potential at all grounding points.
b
Ground the equipotential bonding via the functional ground connection with a low
impedance.
WARNING
The surface of the device can become hot during operation.
b
Before commencing disassembly, switch off the device and allow it to cool down
as necessary.
CAUTION
The cooling fins must not be covered or restricted in their functionality.
NOTICE
b
Only qualified persons from the relevant departments are permitted to work on the
device.
b
Follow operating processes.
b
Follow local regulations.
b
Only authorized persons are permitted access to the system.
b
Generate the same ground potential at all grounding points.
Special local conditions:
b
The local laws, regulations, technical rules and internal company operating instruc‐
tions at the usage site must be observed.
Storage of documents:
This document and further technical documentation/information
b
Must be kept available for reference.
b
Must be handed on to new operating entities/new specialist personnel.
SAFETY INFORMATION
2
8027793/V1-0/2022-07-01 | SICK
O P E R A T I N G I N S T R U C T I O N S | SID Pro
7
Subject to change without notice
