SICK safeRS, Инструкция по монтажу

Страница: 31 / 44

31
M O U N T I N G I N S T R U C T I O N S | safeRS, safeRS3
8024924/1FGF/2022-03-01 | SICK
Subject to change without notice
MOUNTING INSTRUCTIONS
4.7 safeRS3 Control digital inputs and outputs terminal block
Note : facing the control so that the terminal block is on the top left, number 12 is the
closest to the control corner.
Terminal
block
Symbol Description Pin
Digital In 4 Input 2, Channel 2, 24 V DC type 3 - INPUT #2-2 1
3 Input 2, Channel 1, 24 V DC type 3 - INPUT #2-1 2
2 Input 1, Channel 2, 24 V DC type 3 - INPUT #1-2 3
1 Input 1, Channel 1, 24 V DC type 3 - INPUT #1-1 4
V+ V+ (SNS), 24 V DC for diagnostics of the digital inputs
(mandatory if at least one input is used) 5
V- V- (SNS), common reference for all digital inputs (mandatory if at
least one input is used) 6
Digital Out - GND, common reference for all digital outputs 7
4 Output 4 (OSSD4) 8
3 Output 3 (OSSD3) 9
2 Output 2 (OSSD2) 10
1 Output 1 (OSSD1) 11
- GND, common reference for all digital outputs 12
Note : the cables used must have a maximum length of 30 m (98.4 ft) and the maximum
operating temperature must be at least 80 °C.
Note : use only copper wires with a minimum gauge of 18 AWG and a torque of 0.62 Nm
(5,5 lbs in).
4.8 safeRS3 Control power supply terminal block
Note : front view of connector.
Symbol Description
1 GND
2 Earth
3 + 24 V DC
Note : the maximum operating temperature of the cables must be at least 70 °C.
Note : use only copper wires with a minimum gauge of 18 AWG and a torque of 0.62 Nm
(5,5 lbs in).