SICK ReLy MULT1, Руководство по эксплуатации

Страница: 5 / 40

1 About this document
1.1 Purpose of this document
These operating instructions contain the information required during the life cycle of the
safety relay.
These operating instructions must be made available to everyone who works with the
safety relay.
1.2 Scope
Product
This document applies to the following products:
• Product code: ReLy MULT1
• “Operating instructions” type label entry: 8024300
Document identification
Document part number:
• This document: 8024307
• Available language versions of this document: 8024300
You can find the current version of all documents at www.sick.com .
1.3 Target groups and structure of these operating instructions
These operating instructions are intended for the following target groups: project devel‐
opers (planners, developers, designers), installers, electricians, safety experts (such as
CE authorized representatives, compliance officers, people who test and approve the
application), operators, and maintenance personnel.
These operating instructions are organized by the life phases of the device: project
planning, mounting, electrical installation, commissioning, operation and maintenance.
The table below shows the target groups and how – for many applications – these are
typically divided up between the manufacturer and the entity operating the machine in
which the device is to be integrated:
Area of responsibility Target group Specific chapters of these operating instruc‐
tions
1)
Manufacturer Project developers
(planners, developers,
designers) "Project planning", page 12
"Technical data", page 28
Installers "Mounting", page 16
Electricians "Electrical installation", page 19
Safety experts "Project planning", page 12
"Commissioning", page 25
"Technical data", page 28
Operating entity Operators "Troubleshooting", page 26
Maintenance person‐
nel "Troubleshooting", page 26
"Ordering information", page 35
1) Chapters not listed here are intended for all target groups. All target groups must follow all of the safety
and warning instructions in all chapters of the operating instructions!
In other applications, the operating organization is also the manufacturer of the equip‐
ment with the corresponding allocation of the target groups.
ABOUT THIS DOCUMENT
1
8024307/2021-07-30 | SICK O P E R A T I N G I N S T R U C T I O N S | ReLy MULT1 5
Subject to change without notice