7
Depending on the type of window start, quit the teach-in process by
■
Pressing the Set pushbutton when the progress bar is shown on the display
Or
■
Deactivating windowing via the trigger input line
Or
■
Sending the “Trigger window stop” (ISDU 2 – Value 227) system command to
the sensor.
12345
12345
12345
12345
The teach-in process is now complete; the quality of the process (quality of
teach) is shown on the display. If the teach-in process was started via the
“ET” input line, the signal should now be reset to LOW.
OPERATION
6
8022051/2018-01-31 | SICK
O P E R A T I N G I N S T R U C T I O N S | PSS Prime
21
Subject to change without notice
