15
8024592/2019-08| SICK
O P E R A T I N G I N S T R U C T I O N S | NAV210
Subject to change without notice
PRODUCT DESCRIPTION
3
3.3
Operating and status indicators
3.3.1
Operator interface
The 2D LiDAR sensor is fully automatic in normal operation and requires no operator
intervention.
The SOPAS ET configuration software supplied makes interactive configuration possible.
For this, the software runs on a PC which is connected to one of the interfaces with the
NAV210.
Use the graphic scan view in SOPAS ET to verify the generated measured values and the
measuring range online. Please note that the field evaluation monitor cannot display the
data in real time and therefore not all measured values are visualized.
3.3.2
Status indicators
The LEDs and 7-segment display signal the operational status of the NAV210.
Fig. 3: Status indicators
Important
As well as the standard indicators described below, the indicator functions of the LEDs and
the 7-segment display can be configured in SOPAS ET for the NAV210.
Project tree, NAV210, Parameters, Network/Interfaces/IOs, Indicator.
