SICK MCS300P, Руководство по эксплуатации

Страница: 56 / 84

56 8013741/16LH/V1-7/2020-04| SICK O P E R A T I N G I N S T R U C T I O N S | MCS300P Ex
Subject to change without notice
7
MAINTENANCE
7 Maintenance
7.1 Spare parts
7.1.1 Recommended spare parts
7.2 Maintenance plan
▸
Use original SICK spare parts only.
For devices used in potentially explosive atmospheres:
▸
Maintenance and inspection should only be carried out by experienced/trained
personnel with knowledge of the rules and regulations for potentially explosive
atmospheres, especially:
– Ignition protection types
– Installation regulations
– Range specification
▸
Standards to be applied (examples):
– IEC 60079-14, Annex F: Knowledge, skills and competencies of responsible
persons, operatives and designers.
– IEC 60079-17: Electrical installations inspection and maintenance
– IEC 60079-19: Device repair, overhaul and reclamation
Spare part Part No.
Desiccant cartridge (including assembly key) 2010549
Halogen lamp [1]
[1] Depending on device configuration
6023466
IR source insert [1] 2024574
IR chopper / source unit complete 2045537
UV chopper / source unit complete 2047806
24 V power supply unit 6035276
Cell-dependent spare parts → Cell Manual or System Documentation
Interval
[1]
[1] 1W = weekly, 1M = monthly, 6M = half-yearly, 1Y = yearly
Maintenance work Reference
1W Visual inspection see “Visual inspection”, page 57
Check the measured values for plausibility
Device with VIS source: Adjustment with zero
gas
[2] [3]
[2] Source type, see System Documentation
[3] Not required for devices with automatic zero point adjustment (see System Documentation)
see “Adjustment”, page 44
1M Device with IR source: Adjustment with zero
gas
[2] [3]
see “Adjustment”, page 44
Adjustment with internal adjustment
standard
[4]
[4] Option. See System Documentation
see “Adjustment/automatic”, page 45
6M Check the desiccant cartridge and replace if
necessary see “Checking/replacing the desiccant car-
tridge”, page 59
Adjustment of all measuring components with
test medium see “Adjustment”, page 44
6M Function test of the pressurized enclosure
system see “Function test of the pressurized enclosure
system”, page 57
1Y Device with VIS source: Replace the source [2] Replacement by trained skilled person or SICK
Service
Recommendation: Maintenance work on the
cell see Operating Instructions of the cell
Device with IR source: Check reference energy see “Reference energy”, page 49
3Y [5]
[5] Recommendation
Device with IR source: Replace the source [2] Replacement by trained skilled person or SICK
Service