background image

7.2.1

Installing and starting the configuration software

1.

Download and install the latest version of the SOPAS ET configuration software,
as well as the current device description files (*.sdd): 

www.sick.com

. In this case,

select the “Complete” option as suggested by the installation wizard. Administrator
rights may be required on the computer to install the software.

2.

Start the “SOPAS ET” program option after completing the installation. Path: 

Start

Programs 

SICK 

SOPAS ET Engineering Tool

 > 

SOPAS

.

SOPAS ET automatically starts searching for connected devices and displays con‐
nected devices in the 

Device search

 window.

3.

Select the appropriate LiDAR sensor from the list of available devices:

°

Use LRS4000 (port 2111) to configure the device.

4.

Click on 

 Add 

to establish communication.

SOPAS ET establishes communication with the LiDAR sensor, loads its current
device description (parameters), and displays it in the 

New Project

 window.

Figure 22: SOPAS ET: main window

7.2.2

Logging into the device

1.

In the project window, click 

Login 

to establish communication.

2.

Select 

Autorisierter Kunde

 as the 

as user level 

and enter the 

password

 

client

 .

Click the 

Login

 button.

7.2.3

Output of measured values via terminal program

Example commands for output of measured values

If the LiDAR sensor receives one of the two example commands by telegram through
the Ethernet interface, it will start the output of measured values through this data
interface.

The detailed structure of the output telegram as well as the flow of requests and
outputs is described in the “Measurement output telegram” section in the 

Telegram

Listing

 publication (English, No. 8014631).

Request for output of measured values:

Table 9: Telegram structure: sRN LMDscandata

Telegram part

Description

Variable type

Length (byte)

Value range

Command type

Request (SOPAS
read by name)

string

3

sRN

Command

Request data

string

11

LMDscandata

Table 10: Example: 

sRN LMDscandata

Telegram type

Command

ASCII

<STX>sRN{SPC}LMDscandata<ETX>

HEX

02 73 52 4E 20 4C 4D 44 73 63 61 6E 64 61 74 61 03

OPERATION

32

O P E R A T I N G   I N S T R U C T I O N S | LRS4000

8026338/0000/2022-02-15 | SICK

Subject to change without notice

Содержание LRS4000













































Отзывы: