O P E R AT I N G I N S T R U C T I O N S | L F P C U B I C
8019918/ZJA6 / 2017-07-20 | S I C K A G
Subject to change without notice
2 0
5
MOUNTING
5.4
Mounting the probe rod
With the LFP Cubic, the probe rod can be modified by the customer. The specifications
for the probe rod should be as follows:
Probe rod diameter:
7 mm … 8 mm
Female thread on the probe rod: M5
Female thread length:
min. 10 mm
Material:
Stainless steel
M5
min. 10 (0.39)
Ø 7...8 mm
( Ø 0.27... 0.31)
1
Probe rod length
Total probe length: 100 mm … 4000 mm
Total probe length = 15 mm + probe rod length
Set the total probe length as described in Chapter
“8.4.7 Configuring the probe length”
.
The EXPRT-Config-Length menu is password protected. If the system experiences strong
vibrations, secure the probe with thread-locking lacquer.
100
(3.94)
... 4000
(157.48)
15
(0.59)
1
Total probe length
2
Probe rod length
