THR
PRO
TCH
PWR
Q
2.
The set parameters are reset to the factory settings.
6.7
Pro level (advanced settings)
You can use the advanced settings to adapt the device to the particular application
conditions or to configure additional values and functions.
6.7.1
Adjusting the switching logic (light/dark)
The “AUTO” switching logic is preset (factory setting). Light or dark switching is detected
automatically by the sensor.
Dark switching
Light switching
1
2
3
1
Internal received signal
2
Switching threshold
3
Output Q
2
1
3
1.
Press the SET pushbutton.
2.
Use the plus or minus pushbutton to select Pro.
THR
PRO
TCH
PWR
Q
3.
Press SET.
4.
Use the plus or minus pushbutton to select L-d.
THR
PRO
TCH
PWR
Q
5.
Press SET.
6.
Use the plus or minus pushbutton to select the required setting.
THR
PRO
TCH
PWR
Q
Light switching
THR
PRO
TCH
PWR
Q
Dark switching
7.
Press SET.
6.7.2
Setting the switch-on and switch-off delay
1.
Press the SET pushbutton.
2.
Use the plus or minus pushbutton to select Pro and press the SET pushbutton.
6
OPERATION
26
O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime
8020706.1E9P/2022-04-26 | SICK
Subject to change without notice
