8016441/2013-11-22 • © SICK AG • Subject to change without notice
37
Operating the device
"Menu" menu continued
Parameter
Description
MF2Out
EthLnk
Activates or deactivates the warning message when there is no
Ethernet cable connected.
Options
• On
• Off
Factory setting
• Off
WrnLvl
Activates or deactivates the warning message when the recei-
ved signal level drops, e.g. due to contamination.
Options
• On
• Off
Factory setting
• Off
NotRdy
:
Activates or deactivates the warning message when the laser
is not ready for operation. This may be due to a hardware error
or it may be because the laser is switched off. This warning
message is also issued during initialization.
Options
• On
• Off
Factory setting
• On
Heat
Activates or deactivates the warning message when the
heating is switched on. This parameter is only displayed on
devices with the "Heating" option (ISD400-7X2X)
Options
• On
• Off
Factory setting
• Off
Heat
• This parameter is only displayed on devices with the "Hea-
ting" option (ISD400-7X2X)
• Defines the switch-on threshold for the heating (–10 to
+40 °C).
Factory setting
• –10 °C
Reset
Resets all parameters in the menu.
Table 9:
"Menu" menu