SICK IDM1 Series Скачать руководство пользователя

Страница: 16 / 82

Getting Started

8014563/VP14/2011-11-30

Establish SPP Slave Connection

Ensure the battery is fully charged and a virtual COM port is available in your remote host for connecting the scanner. If

not, please go to the folder of “Client Applications” located in Bluetooth Advanced Setting. Click the “Add COM Port” to

add one more Bluetooth COM port.

Power on the scanner within radio range and ensure the status indicator of scanner gives alternating red and green

blinks (in “Uninstall” state). If the scanner is not in uninstall state, please scan the “Uninstall” command first. Then scan

the “SPP Slave Mode” command, and the link indicator of scanner will give 3 blue blinks per 2 seconds.

Uninstall

SPP Slave Mode

Execute the Bluetooth Discovery procedure to find all available Bluetooth device list in your remote host. You will see

‘’ IDMxxxBT-xxxx’’ is shown in the list if the scanner is successfully discovered already.

Double click the “IDMxxxBT-xxxx” on the discovered Bluetooth devices. If the PIN Code or Passkey is requested for

security connection, please enter “00000000” (default setting). You will see “Serial Port on IDMxxxBT-xxxx”, and double

click this SPP service to establish the connection between the scanner and the remote host device.

The scanner will give 4 beeps in ascending tone to indicate the radio is connected. At the same time, the link indicator of

scanner will give 1 blue blink per 2.5 seconds to indicate the scanner is in radio-connected state.

Please note that if the scanner is not connected to the host device within 1 minute, the scanner will go to sleep. You can

press the trigger to wake up the scanner to continue the installation.

The installation procedures vary on different remote host devices, operating systems and the Bluetooth software drivers.

Please consult your professional IT consultant to obtain necessary support if any problem has been encountered during the

installation processes.

Содержание IDM1 Series



















































































Результаты поиска

Содержание IDM1 Series

Отзывы:

Похожие инструкции для IDM1 Series

Бренды по названию

Популярные бренды

SICK IDM1 Series, Руководство по программированию

Результаты поиска

Содержание IDM1 Series

Отзывы:

Похожие инструкции для IDM1 Series

Бренды по названию

Популярные бренды