
Table 5: Pin assignment of the “ETHERNET 1 ...3” connections (GBit)
Pin
Signal
Function
1
TRD0_P
/r0
2
TRD0_N
Sender–/receiver– 0
3
TRD1_P
/r1
4
TRD1_N
Sender–/receiver– 1
5
TRD3_P
/r3
6
TRD3_N
Sender–/receiver– 3
7
TRD2_N
Sender–/receiver– 2
8
TRD2_P
/r2
“FAN” connection (depends on variant)
1
4
3
5
2
Figure 10: Female connector, M12, 5-pin, A-coded
NOTE
Device with variant A connection mask: available.
Device with variant B connection mask: not available. The device has an integrated fan
connection.
NOTE
The “FAN” connection is used exclusively for supplying voltage to and controlling the
device’s fan.
Table 6: Pin assignment of the “FAN” connection
Pin
Signal
Function
1
V
S OUT
FAN
Fan supply voltage (12 V)
2
Tacho FAN
Fan RPM signal
3
GND FAN
Fan ground
4
N. c.
–
5
N. c.
–
"LIGHT 1” connection
1
7
2
6
3
4
5
8
Figure 11: Female connector, M12, 8-pin, A-coded
Table 7: Pin assignment of the “LIGHT 1” connection
Pin
Signal
Function
1
N.c.
–
2
(Q1)
Trigger signal for illumination unit 1
3
N.c.
–
6
ELECTRICAL INSTALLATION
24
T E C H N I C A L I N F O R M A T I O N | Camera ICD890 Generation 4
8023775/18IM/2020-07-02 | SICK
Subject to change without notice