SICK GMS815P-PS-2G, Дополнительные инструкции по эксплуатации

Страница: 14 / 40

14 GMS815P-PS-2G/-3G · Supplementary Operating Instructions · 8016234 V2.0 · © SICK AG
Installation
Su
bj
ec
t t
o c
han
ge
w
ith
ou
t n
ot
ic
e
3.1
Safety information
3.1.1
Safety during transport and assembly
3.1.2
Protection against dangerous sample gases
If the sample gas can be dangerous to health, combustible and/or corrosive:
▸
Make sure no dangerous situations can arise should a gas leak occur.
▸
Check
– whether a gas detector must be installed at the installation location
– whether the enclosure must be purged continuously with a neutral gas during oper-
ation (with monitoring the discharged purge gas as required).
Install appropriate additional devices as necessary.
▸
Check gas paths regularly for leak tightness.
CAUTION: Risk of injuries
The weight of the enclosure can cause injuries when the device is not lifted in
an ergonomical way.
During transport and assembly:
▸
Consider the weight of the enclosure before lifting ( → p. 33, §6.3 ).
▸
Call in further personnel as assistants as required.
CAUTION: Risk of injuries
There is a risk of injuries should the enclosure drop down due to the weight of
the device and through hard, protruding enclosure parts.
During transport and assembly:
▸
Wear safety shoes. Use non-slip gloves.
▸
Handle the device carefully and safely. Secure during transport. Avoid falls
and collisions.
▸
Call in further personnel as assistants as required.
NOTICE: Risk of damage
▸
Do not use gas connections and cable inlets as lifting points.
NOTICE: Risk through transport safety devices
▸
Remove transport safety devices before start-up ( → p. 15, §3.2.3 ).
Otherwise electronic components can overheat during operation.