manualshive.com logo in svg

SICK flexLock, Руководство по эксплуатации, Страница: 23 / 52

Поделиться
Скачать
SICK flexLock Скачать руководство пользователя страница 23

Figure 13: Mounting using the optional mounting bracket

Minimum requirement on the screws for mounting the mounting bracket

•

Size: M6

•

Stainless steel screws: A2-70 or higher

•

Tightening torque: 5 Nm

•

Apply at least a medium-strength, material-bonded screw adhesive.

•

Screws are protected against manipulation, e.g., with screw covers. The mounting
bracket cannot be removed.

5.4

Mounting the actuator

Approach

1.

Select a position for the actuator on the movable physical guard. Select the
position in such a way that the actuator is inserted into the safety switch when the
movable physical guards closes.
For flexible actuators, the actuator tongue can be rotated in 90° increments if
necessary. To do so, press and rotate the actuator tongue in the actuator.

2.

Attach the actuator to the movable physical guard.

Minimum requirement for mounting screws

°

Design: Use one way screws to make unauthorized removal of the actuator
difficult (manipulation protection).

°

Quantity: 2

°

Size

Actuator

Size

Flexible

M5 × 25 (or longer)

Rigid

M5 × 14 (or longer)

°

Strength class: Class 8.8 or higher (stainless steel screws: A2-70 or higher).

°

Tightening torque: 5 Nm

3.

Apply at least a medium-strength, material-bonded screw adhesive.

4.

Close mounting holes with protective caps.

MOUNTING 

5

8020562/2022-07-07 | SICK

O P E R A T I N G   I N S T R U C T I O N S | flexLock

23

Subject to change without notice

Содержание flexLock





















































Отзывы:

Нет отзывов