SICK CLV62x Скачать руководство пользователя

Страница: 27 / 40

Online Help

Chapter

Barcode Scanner CLV62x

CLV62x

8011967/S345/2008-04-23

2.2.4.3 Match-code teach-in

Read-in the respective templates to define (teach-in) the evaluation conditions "TeachIn1"
and "TeachIn2".
It is possible to modify the evaluation conditions after teach-in (see

chapter 2.2.4.2 Evalu-

ation conditions, page 23

Match-code teach-in 1

(standard)

Use the parameters of the

Match-code teach-in 1 (standard)

group to define the settings for

the teach-in of the first evaluation condition.

Match-code teach-in 2

(additional)

Use the parameters of the

Match-code teach-in 1 (standard)

group to define the settings for

the teach-in of a second evaluation condition.

Parameter

Function

Target evaluation condition

Select evaluation condition that will be teached in.

Invert condition

Activate/deactivate whether evaluation condition will be logically
inverted.

Teach-in triggered from

Select trigger source for teach-in of evaluation condition.

Teach-in triggered by buttons

Activate/deactivate button on bar code scanner as trigger source.

Teach-in code content

Activate/deactivate teach-in of code content.

Teach-in code ID (type)

Activate/deactivate teach-in of code ID.

Teach-in code length

Activate/deactivate teach-in of code length.

Parameter

Function

Target evaluation condition

Select evaluation condition that will be teached in.

Invert condition

Activate/deactivate whether evaluation condition will be logically
inverted.

Teach-in triggered from

Select trigger source for teach-in of evaluation condition.

Teach-in code content

Activate/deactivate teach-in of code content.

Teach-in code ID (type)

Activate/deactivate teach-in of code ID.

Teach-in code length

Activate/deactivate teach-in of code length.

Содержание CLV62x







































Результаты поиска

Содержание CLV62x

Отзывы:

Похожие инструкции для CLV62x

Бренды по названию

Популярные бренды

SICK CLV62x, Онлайн руководство пользователя

Результаты поиска

Содержание CLV62x

Отзывы:

Похожие инструкции для CLV62x

Бренды по названию

Популярные бренды