y
y
x
x
y
y
x
x
1
2
3
1
2
4
m
m
y (radial)
x (axial)
1
Sensor element 1
2
Sensor element 2
3
Axially magnetized magnet
4
Diametrically magnetized magnet
3.3.2
The sensor is designed for a detection range of 50 mm. The zero point / physical zero
position is marked with arrows on the sensor head and is located roughly at the center
point of the sensor. From the zero point, -25 mm are measured to the cable and
+25 mm to the fixing screw.
NOTE
The maximum detection range is 60 mm. The actual detection range can vary and
depends on the drive.
50
(1.97)
25.3
(1.00)
0
- 25
(0.98)
+ 25
(0.98)
1
2
3
Figure 4: Detection range
1
2
Housing length
3
Zero point / Physical zero position
3.3.3
Position output
The sensor can output a linearized position in a detection range of approx. 50 mm
(depends on the drive). Only when the
Out-of-Range
display is activated are 11 V or
10.5 V displayed when the magnet leaves the measuring range. The
Out-of-Range
display
is only activated with Manual Teach.
PRODUCT DESCRIPTION
3
8025941/2020-07-16 | SICK
O P E R A T I N G I N S T R U C T I O N S | MPS-G with analog output
11
Subject to change without notice
